Vision II Basic Configuration

Use this page to configure initial settings for the Vision II. All fields are required.

IP Settings
Enter Hostname
Enter IP Address
Enter Network Mask
Enter Default Gateway
Enter DNS Server
Http/Https Server Settings Enter port number
Enter SSL port number
Identification Enter Site ID
Enter Site Name
Enter Division ID (optional)
Enter Device ID
Enter Device Name
Global Settings Schema used for output XML data
Date and Time Info mm/dd/yyyy
hh:mm:ss (0-24 hrs)
Select time zone
Select the protocol used to sync
What time server would you like to synch with?
Enter port number

Logging
Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL Path
Encrypt data using SSL/TLS
Enter IP address (0.0.0.0) or hostname
Test Settings

Once all the logger information has been entered, test your settings by clicking the button below. The device will attempt to establish a connection to the Logger Server specified above.

Device Manager
Enter IP address (0.0.0.0) or hostname
Enter port number
Enter the connect frequency, in milliseconds, to the Device Manager
Test Settings

Once all the information has been entered, test your settings by clicking the button below. The device will attempt to establish a connection to the Device Manager Server specified above.

Proxy
Enter IP address (0.0.0.0) or hostname
Enter port number
Server Authentication


Test Settings

Once all the information has been entered, test your settings by clicking the button below. The device will attempt to establish a connection to the Proxy Server specified above.

Batch Data Streaming

Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL Path
Specify delivery interval
Specify delivery schedule
Encrypt data using SSL/TLS
Enter IP address (0.0.0.0) or hostname


Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL Path
Specify delivery interval
Specify delivery schedule
Encrypt data using SSL/TLS
Enter IP address (0.0.0.0) or hostname
Real Time Data Streaming

Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL path
Enter frequency in milliseconds
Select delivery protocol
Skip sending when all zones inactive
Alert Delivery Data Streaming

Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL path
Time to wait between alerts in milliseconds
Deliver Counts with Alerts
Select delivery protocol
Alert Digital Input/Output

Select negative-positive-negative or positive-negative-positive
Enter pulse length in milliseconds
Enter after-pulse delay length in milliseconds
Select Zone



Select negative-positive-negative or positive-negative-positive
Enter pulse length in milliseconds
Enter after-pulse delay length in milliseconds
Select Zone



Select negative-positive-negative or positive-negative-positive
Enter pulse length in milliseconds
Enter after-pulse delay length in milliseconds
Select Zone

Email Delivery
FTP Delivery

Enter FTP address
Enter port number
Destination file format: #S='Site Name' #I='Site ID' #D='Date' #T='Time' #M='MAC Address'
Use FTP over SSL/TLS
Enter IP address (0.0.0.0) or hostname
Server Authentication


Enter the directory where to place files. Enter '.' for the user home directory
FTP Data Aggregation
Specify aggregation time interval
Specify delivery format
Specify delivery schedule
hh:mm (0-24 hrs)
Enter the max transmission attempts
Enter the retry interval in seconds
Active FTP

Lowest Available Port (1024 and 65535)
Highest Available Port (1024 and 65535)

 

Use this IP address instead of the Vision II IP
Test Settings

Once all the ftp information has been entered, test your settings by clicking the button below. The device will attempt to establish a connection to the FTP Server specified above.

Traffic Map Delivery

Enter IP address (0.0.0.0) or hostname
Enter port number
Enter HTTP URL Path
Specify delivery schedule
Encrypt data using SSL/TLS
Enter IP address (0.0.0.0) or hostname

Path Linking

Enter port number

Available Device Data

mm/dd/yyyy
hh:mm:ss (0-24 hrs)
mm/dd/yyyy
hh:mm:ss (0-24 hrs)